Yes, but only if you keep direct heat and pressure off the metal plaque. A metal logo plaque can conduct heat quickly, which may discolor surrounding fabric, soften adhesives (if the plaque is bonded), or leave a shiny “press mark” on cotton. The safest approach is to avoid ironing the plaque area entirely and use low heat with a protective barrier for the rest of the hoodie.
Steaming is usually safer than ironing because it relaxes wrinkles without flattening the fabric against a hot plate. Hang the hoodie on a sturdy hanger, then steam from a short distance (about 1–2 inches) while moving continuously. Keep the steamer head away from the plaque and any stitching around it; instead, steam the surrounding fabric and let the heat migrate gently. Finish by smoothing with your hands and letting it fully air-dry before wearing or storing.
Turn the hoodie inside out and iron from the inside whenever possible. Use a low-to-medium cotton setting, no steam bursts directly on the plaque area, and place a pressing cloth (clean cotton or a thin towel) between the iron and the fabric. If wrinkles sit near the plaque, “edge press” around it—never on top of it—and lift the iron frequently rather than dragging it.
Don’t press directly over the metal plaque, don’t use high heat to “force” stubborn creases out, and don’t clamp the area with heavy pressure. Also avoid leaving a steamer parked in one spot, which can overheat the fabric or loosen trims over time.
For details on the specific hoodie design and care considerations, see the guide here: Valentino cotton hoodie with VLogo plaque and kangaroo pocket.
Hang it in a steamy bathroom for 10–15 minutes or use a handheld steamer on the fabric while keeping it moving. Then smooth the hoodie by hand and let it cool on the hanger.
Leave a comment